Insulation Resistance Tester, 550kV High Voltage Nuclear Phase Instrument Frequency Measurement Table Phase Tester Phonetic Phase Voltage Test Function ES2080

Specification:Function frequency measurement, phase measurement, phase sequence display, *voltage measurement, voltage inspection Contact nuclear phase: bare wire below 35 kV or wire with insulated sheath core phase below 550 kV can contact the wire core phase non-contact nuclear phase Mutually.When the bare circuit voltage exceeds 35 kv, non-contact testing must be used, and the probe gradually approaches the core phase of the wire.Transmission distance: wireless transmission, linear transmission distance is about 30 metersPhase identification: In-phase: -25° ~25° Out-of-phase: 95° ~145° and 215° ~265°<;±12°; resolution: 0.10°<;±2hz; resolution: 0. 1hz*Voltage range: 70 v ~ 110 kv; accuracy: ±10% resolution: 100 vTransmitting frequency: 433 mhz 315 mhzDisplay mode: 3.5-inch color screenLCD display size: 72 mmx55mmInstrument size host: 187×119×48 mmDetector: 146×100×75 mmPhase indication Phasor diagram and digital display at the same time: The detector has the function of sound and light indication when the working indication nuclear phase, red double flashing light indication and "beep-beep-beep-beep" buzzer soundData storage: 300 groups, flashing "FULL" symbol indicates that the storage is fullData access: data access function: "READ" symbol displayAlarm function: when the measured value exceeds the alarm set value, an alarm will be issuedPower consumption detector: 30mA MAXHorse host: 150 mA MaxBattery voltage: The battery voltage is insufficient, and the low battery symbol is displayedAutomatic shutdown: the meter will shut down after about 15 minutes of inactivityInsulation rod length: maximum diameter 038 mm; length: 3 metersInsulation test: both ends of the insulating rod after stretching: AC 220 kV/rms;Working temperature and humidity: -10℃~ 40℃; below 70% rhStorage temperature and humidity: -10℃~ 60 c; below 80% rh

• -E52080 wireless high voltage phase nuclear instrument is used in power line or substation inspection, nuclear phase, phase test, phase sequence judgment, transformer group judgment, etc. (line voltage: 70 v-550 kv)
• -The nuclear phase instrument adopts wireless transmission technology, the transmission distance can reach 30 meters; 3.5-inch LCD color screen, can display phase, frequency, voltage and other nuclear phase results on the same screen, dynamic vector diagram instructions, clear and intuitive: with voice prompt "X signal is normal ,Y signal is normal, in phase, out of phase" and so on.
• -Nuclear phase voltage range: 70V～550kV
• -Phase range: 0.0°～360.0°
• -Frequency range: 45.0Hz～65.0Hz, 3.5-inch color screen, phasor diagram and digital display at the same time
• -Data storage: 300 groups, wireless transmission 30 meters