Electric Bike Controller, 22A 500W Brushless Motor Controller, 48V with GD01 LCD Display Panel 130X Thumb Throttle for Electric Scooter and DIY Bike Modification

1. Full Kit: There is 22A controller, GD01 panel, 130X thumb throttle, 8C power assist sensor and 1T2 connecting line included in the package, full kit will be enough to meet your needs to upgrade your bike. 2. Controller Outer Housing: The controller housing is made of metal with grooves which is designed to protect the internal circuitry from thermal overload due to good heat dissipation effect. 3. GD01 Panel: The panel is made of ABS material, light and durable, with fine workmanship, good toughness and waterproof performance, providing better protection for the internal circuit and making it more durable. 4. Panel Function: GD01 panel can be compatible with 36V and 48V voltages. When riding a bicycle, the product will display many useful data on your bicycle, such as: intelligent power display, truly reflect the battery power, record the power consumption in real time, ensure the riding mileage, headlamp control, backlight brightness 3 level adjustment, five gear control, mileage display, fault code display, help promote the mode of 6km / h, etc. 5. Widely Use: Applicable to 500W motor. Main uses: DIY electric bicycle, electric vehicle, electric scooter, folding car, etc. Easy to maintain, lithium battery modification of bicycle greatly improves the fun of riding, which is suitable for cyclists who like challenges. Specification: Item Type: Electric Bike Motor Controller Material: Aluminum Alloy, ABS Plastic Controller Box Size: Approx. 120 x 53 x 32 mm / 4.7 x 2.1 x 1.2 in (Allowable error for manual measurement) Panel Size: Approx. 82 x 48 mm / 3.2 x 1.8 in (Allowable error for manual measurement) Weight: Approx. 632 g / 22.2 oz Rated Voltage of Controller: DC 36V / 48V Maximum Current of Controller: 22A Controller Speed Setting: 1-4.2v Controller Brake Input: Low Level :1:5 Applicable Motor Power: 500W Joint Type: Full Waterproof Joint Controller Line Definition: 1. Single red and black cable: Power Cable 2. Black single large wire (9pin): Motor Wire 3. Black single wire (9pin): 1T2 Wire 4. Black single wire (3pin): Power Assist Sensor Wire 5. Black single wire (2pin): Light Wire GD01 Panel Function Description: 1. Adopt two way communication protocol 2. Real time speed display 3. Kilometer / mile display 4. Intelligent power display 5. Headlamp control 6. Backlight brightness 3 level adjustment 7. Fifth gear control 8. Mileage display 9. Fault code display 10. Boost the implementation mode 6km / h 11. Parameter setting How to Use: Description of controller: the line color definition interface on the controller can realize the function by connecting the socket of accessories. For specific operation, please refer to the wiring diagram and instructions. GD01 panel operation instructions: fix the LCD display part and button of the instrument on the handlebar of electric vehicle, and adjust the appropriate viewing angle. When the vehicle is powered off, connect the instrument connector with the corresponding connector of the controller. Turn on the power supply, the electric vehicle and instrument enter the normal operation state, and the instrument installation is completed. When the instrument is shut down, long press the M key for 3 seconds, the instrument will fully display and start working, and turn on the power supply of the controller; Press and hold the M key for 3 seconds in the power on state, the instrument power will be turned off, and the controller power will be turned off. If you do not ride for 10 minutes (the time can be set by the user) and do not operate the instrument, the instrument will automatically turn off the power. In the shutdown state, the power consumption of the instrument and controller is 0. Package List: 1 x Controller 1 x Panel 1 x Throttle Dial 1 x Boost Sensor 1 x Controller Wiring Instruction 1 x 1T2 Connecting Wire Notice: Note that the modification kit must be fully waterproof.

• [Complete Modification Kit] Electric bike controller package includes 22A controller, GD01 LCD display panel, 130X thumb throttle, 8C power assist sensor and 1T2 connecting line for seamless electric scooter or DIY bike upgrades without missing components
• [Advanced Heat Management] Metal controller housing with grooves ensures effective heat dissipation protecting internal circuitry from thermal overload during extended riding sessions on 500W motor applications
• [Smart Display Functionality] GD01 panel displays real time battery power, riding mileage, fault codes and features headlamp control, 3 level backlight adjustment, five gear speed settings and 6km h assist mode for enhanced cycling experience
• [Dual Voltage Compatibility] Brushless motor controller works with both 36V and 48V systems providing versatile integration for electric bicycles, scooters, folding cars and other 500W motor vehicles
• [Durable Waterproof Design] ABS material panel offers lightweight toughness and waterproof performance safeguarding internal circuits while supporting easy maintenance and lithium battery modifications for adventure cyclists