DONGKER Digital Load Cell Module,24-bit Weighing Instrument TTL Serial Modbus with Display Intelligent Load Cell Board

General Parameters:Lock:Press the SEL settings below,and the display window will display the indicator LOCK, then 1230, and then change to 1231 before you can enter the following parameters.Dot:20kg sensor,can be set with 3 decimal points 20.000kg200kg sensor,can be set with 2 small points 200.00kg2000kg sensor,can be set with 1 decimal point 2000.0kgLb:0:Do not do anything.140:The higher the set value,the better the filtering effect,but the slower the speedAd-H:Acquisition speed(0 low speed,1 fast speed)CLr:The power-on zero-tare range (0999.9),the parameter is greater than zero, and the meter is automatically cleared and tare within this range when the meter is powered on.Fd:Selectable graduation values(1, 2, 5, 10, 20, 50, 100, 200)Z-t:Zero tracking time(10.0600.0s)FSET:Correction factor,display value=display value*1.0000Alarm Parameters:AL:PVL: Both ALI and AL2 are lower limit alarms, the measured value is lower than the lower limit, and the relay is engaged.PVH: Both ALI and AL2 are upper limit alarms, the measured value is higher than the upper limit, and the relay is engaged.PVHL: PWL: AL1 is the upper limit and AL2 is the lower limit.OFF: Closes the reporting function.AL1: When the measured value exceeds (50.0), the relay will act, and when the measured value is lower than 45.0, AL1 will be disconnected.AH1: Upper Limit Alarm Return Difference.AL2: The AL2 upper limit alarm is set to a fixed value, when the measured value exceeds (150.0), the relay acts, and when the measured value is lower than 145.0, AL1 is disconnected.AH2: Upper Limit Alarm Return Difference.Package:1 x Intelligent weighing digital display module

• The weighing acquisition module is a high-performance, multi-functional electronic weighing device, which adopts advanced weighing sensing technology, which can measure the weight of the product in real time and display it with a five-digit code tube, and has the upper and lower limit alarm function, which can achieve accurate weighing control and monitoring.
• At the same time, the product also has TTL communication connection and MODBUS RTU communication protocol, which can quickly communicate with PLC, computer and other equipment to achieve the transmission and remote control of weighing data.USB-C/5V power supply and button debugging function, easy to use, strong stability.Lightweight and portable, easy to install and move, saving space and cost.
• In Addition, It Also Supports USB-C Power Supply And Key Debugging Functions, Which Improves The Convenience And Stability Of Use. The MAX Input Is 12mV, Which Is Not A Voltage Gauge And Cannot Be Connected Directly To The MV Signal, Only To The Weighing Sensor.LoCK: Press the SEL settings below, and the display window will display the indicator LOCK, then 1230, and then change to 1232 before you can enter the following parameters.
• High-precision weighing sensors for accurate weight measurement and numerical display.The five-digit sensor display is intuitive and clear, allowing for high-speed weighing and is suitable for efficient weighing processes.Limit the alarm function to achieve early warning and strict control, and improve quality.Support TTL communication and MODBUS RTU communication protocol to quickly implement data transmission and remote control.
• SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please contact us.We will provide after-sales service .