C2G 3ft (0.9m) Cat5e Non-Booted Unshielded (UTP) Network Crossover Patch Cable, Yellow

The C2G 24497 is a Cat5e crossover patch cable that lets you connect two Ethernet devices directly, making it easy to share files between computers or link network hardware without an uplink port. At three feet, or roughly 0.9 meters, it fits neatly between devices that sit on the same desk or inside the same rack, so you avoid extra slack and reduce cable clutter.

This cable follows Cat5e TIA/EIA standards, which means it supports data rates up to Gigabit Ethernet while keeping impedance and signal loss in check. Each wire pair stays bonded to preserve twist spacing, a detail that helps cut down on near-end crosstalk and keeps the link stable under load.

The physical build is straightforward and purposeful. It uses 24 AWG stranded copper for flexibility, an unshielded twisted pair design for easy routing, and a PVC jacket that stands up to everyday pulls and bends. The connectors arrive without boots, so you can plug and unplug the cable quickly in dense patch panels or tight workstation setups without fighting extra rubber around the latch. A bright yellow jacket makes the run easy to spot among other lines, which is helpful when you need to trace a connection in a hurry.

In practical terms, the 24497 suits IT technicians who perform quick bench tests, small business owners who want to daisy-chain two switches temporarily, or home users who need a direct PC-to-PC link for large file transfers. Because it is CE and REACH compliant, it also meets many workplace safety and environmental requirements.

Highlights:

• Three-foot length, or 0.9 meters, for short device-to-device runs
• Cat5e crossover wiring allows direct links without a hub or switch uplink port
• Unshielded twisted pair with 24 AWG stranded copper for flexible installs
• Non-booted RJ45 connectors make patch-panel moves quick and easy
• PVC jacket in a high-visibility yellow color
• Meets TIA/EIA Cat5e performance, CE, and REACH standards