8141 Vertical Siding Lamp Octagon Mounting Kit, White, 1-Pack | Siding Mounting Block, Vinyl Sidings Mounting Blocks, Built-in Electrical Box, For 1/2" Deep Outdoor Vertical Sidings LAP

Package Included:There are a Mounting Block with Built-in Electrical Box, Cable Connectors and four Mounting Screws on the package to ensure you have enough supplies to complete your projects. To make sure you have enough supplies to complete the project. You can install the exterior light pn vinyl wall panel with mounting plate as needed

• Siding Mounting kit :8141-1 Vertical Siding Lamp Octagon Mounting Kit with Built-in Box for 1/2 Inch (0.5") Outdoor Vertical Siding appears to be a product designed for mounting outdoor lighting fixtures on vertical siding.vinyl mounting block for siding is made of sturdy plastic material with a white, paintable finish, you can also paint the fixture the colour you want to match the colour of your vinyl siding mounting blocks, or just leave it in its natural beige colour
• Size Details:Siding mounting kit size is 6.53 inches width by 6.53 inches length. Please check the size data in the picture. If you find that your outdoor light siding mount is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding. You will need to caulk around the top of the box to prevent water from infiltrating the electrical box
• Vinyl Mounting Block for Siding Widely Used: siding light mounting block Mounts fixtures to all types of wall panels, including T-111, HardiePlank Siding and other flat surfaces. It makes it easy to add new lighting to existing wall panels using the built-in electrical box
• Package Included:There are a Mounting Block with Built-in Electrical Box, Cable Connectors and four Mounting Screws on the package to ensure you have enough supplies to complete your projects. To make sure you have enough supplies to complete the project. You can install the exterior light pn vinyl wall panel with mounting plate as needed
• Easy To Install：vinyl siding repair kit with built-in electrical box is super easy and fast to install on Vertical Siding. 1.Drill the hole through the siding to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box